Elo-touchsystems LCD Bedienungsanleitung Seite 28
- Seite / 66
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
2-23
Installing the Serial Touch Driver for MS-DOS and
Windows 3.1
To install Windows 3.x and MS-DOS from Windows 95/98, follow the
directions below:
1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
2 From DOS, type d:\EloDos_W31 to change to the correct directory on the
CD-ROM (your CD-ROM drive may be mapped to a different drive letter).
3 Type install and press Enter to start the installation.
4 Align the touchscreen.
You must have already completed Steps 1 and 2 before proceeding. Refer to
Chapter 2 of the Elo DOS and Windows Driver Guide as necessary for
additional installation information.
To run the INSTALL program:
1 Type INSTALL at the DOS prompt in the directory containing the driver
install files.
2 INSTALL asks you to select the software to install. Then choose
d:\EloDos_W31 from the displayed list.
3 INSTALL also asks you for the paths to use during installation, or you may
use its defaults. INSTALL creates directories as necessary, and warns you if
they exist.
If you are updating your software, you may wish to specify the paths containing
the earlier versions, and overwrite the obsolete files. All executable programs
are upward compatible. For a list of differences from each previous version of
the drivers, be sure to select "Differences from Previous Versions" during the
installation process.
INSTALL updates your AUTOEXEC.BAT file with the drivers you select.
INSTALL makes a copy of your original AUTOEXEC.BAT file, called
AUTOEXEC.OLD. If you already have Elo driver commands in your
AUTOEXEC.BAT file, they will be commented out.
When INSTALL is finished, it leaves a file called GO.BAT in the subdirectory
you specified. GO loads the touchscreen driver, runs the calibration program
ELOCALIB, and gives you some final instructions.
If you are using Windows 3.1, you will also align the touchscreen within
Windows 3.1 with the Touchscreen Control Panel.
- (OR(QWXLWLYH7RXFKPRQLWRU 2
- 8VHU*XLGH 2
- Disclaimer 3
- Trademark Acknowledgments 3
- Table of Contents 5
- NTRODUCTION 6
- NSTALLATION AND 8
- Product Overview (1545L) 9
- Bottom View/Side View 10
- Main Unit 10
- Rear View 11
- Side View 11
- Product Overview (1567L) 12
- Attaching the L-Brackets 14
- Touch Interface Connection 15
- Connecting the Video Cable 16
- Connect the Remote OSD Cable 18
- Connecting the Power Cable 19
- USB Connection 20
- Connections on underside 24
- Power Cable 24
- Power cable 24
- Optimizing the LCD Display 25
- Windows 2000 27
- , Me, 95/98 and NT 4.0 27
- Windows 3.1 28
- PERATION 30
- 5HPRWH26'%XWWRQV 31
- OSD Menu Function 32
- ROUBLESHOOTING 34
- ESOLUTION 36
- OUCHMONITOR 38
- ECHNICAL 40
- PECIFICATIONS 40
- Table C.1 41
- Table C.2 42
- Mechanical 43
- Environmental 43
- LCD Touchmonitor Dimensions 45
- ET1547L/1548L/1549L 46
- ET1547L Rackmount 49
- ET1545L Front Mount Cut Out 53
- ET1545L Rear Mount Cut Out 54
- Vertical Attachment 55
- Horizontal Attachment 55
- Without Brackets 56
- EGULATORY 58
- NFORMATION 58
Verwandte Produkte und Handbücher für Monitore Elo-touchsystems LCD
(52 Seiten)
(2 Seiten)Philips SHM1900-93 manuali
Manuali dei proprietari e guide per l'utente per Video Philips SHM1900-93.
We fornisce 1 manuali pdf Philips SHM1900-93 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Kommentare zu diesen Handbüchern