Elo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0 Betriebsanweisung PDF herunterladen (Seite 110)

Section 2. Installation

6. Select 8 data bits, no parity, 1 stop bit.

7. With the LED on, swipe a card. The data on the screen will show Track 1 beginning with

“%” and ending with “?”. Track 2 begins with “;” and ends with “?”. Track 3 begins

with “+” (normal) or "!" (CDL) and ends with “?”. The following is an example:

%B123^Smith/Joann^9812101000?;112222333333444444444?<0x0D>

If a track cannot be read, an E will appear in place of the track data; for example, if

Track 2 is bad and Tracks 1 and 3 are good, the display will be similar to the following:

%11111111111111111111?;E?+3333333333333333333?<0x0D>

If Tracks 1 and 3 are bad and Track 2 is good, the display will be similar to the following:

%E?;22222222222222222222?+E?<0x0D>

8. If the data on the screen is not numeric or alphanumeric similar to the above, check the

communications rate. If the alphanumeric characters are similar to the above, the unit is

ready for operation.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 248 249

Keine Kommentare

Elo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0 Betriebsanweisung Seite 110