Elo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0 Betriebsanweisung PDF herunterladen (Seite 230)

INTERFACE CONNECTION

Serial Interface Connector Configuration

The pin out configuration for the standard serial pole display is a

DB9F connector. It plugs directly into the serial port of the computer.

1. DCD (tied to pins 4&6)

2. NC

3. TXD from PC

4. DTR (tied to pins 1&6)

5. Ground

6. DSR (tied to pins 1&4)

7. RTS (tied to pin 8)

8. CTS (tied to pin 7)

9. NC

For pass-through models, the display cable comes with two

connectors. The DB9F is to be connected to the computer while the

DB25M is for connection to the peripheral.

1. DCD (tied to pins 4&6)

2 TXD to PC

3 RXD from PC

3. DTR (tied to pins 1&6)

4. Ground

5. DSR (tied to pins 1&4)

6. RTS (tied to pin 8)

7. CTS (tied to pin 7)

8. NC

1. NC

2. TXD to peripheral

3. RXD from peripheral

4. RTS

5. CTS (tied to pin 20)

6. NC

7. Ground

8. NC

9-19 NC

20 DTR (tied to pin 5)

21-25 NC

DB25M (to peripheral)

DB9F (to computer)

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 248 249

Keine Kommentare

Elo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0 Betriebsanweisung Seite 230