Elo TouchSystems B-Series Betriebsanweisung PDF herunterladen (Seite 14)

Chapter 2 : Installation

Elo LCD Touchmonitor User Guide - 12

Connecting the Cables

Your touchmonitor comes with two touchscreen connector cables:

Serial (RS-232) cable and USB cable (For Windows 98 computers

only.)

1. Before connecting the cables to your touchmonitor and PC, be

sure that the computer and the touchmonitor are turned off.

2. Connect the ferrite end of the video cable to the video connector

on your PC. Connect the other end of the video cable to the

touchmonitor. Secure the cable to your touchmonitor and PC by

turning the screws on the connector.

3. Connect the power cord to the AC connector on your touchmon-

itor. To protect your equipment against risk of damage from

electrical surges in the power line, plug the touchmonitor’s

power cord into a surge protector, and then connect the power

strip to a grounded (three-pronged) AC electrical outlet.

4. Connect either the Serial cable or the USB cable. Do not connect

both cables.

❑ If you are using a serial connection, connect the female

end of the serial (RS-232) cable to the serial port on the

back of your PC. Connect the male end of the cable to the

touchscreen connector on your touchmonitor.

AC Power

Video (15-pin)

OSD

USB

Serial (RS-232)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 48 49

Keine Kommentare

Elo TouchSystems B-Series Betriebsanweisung Seite 14