Elo TouchSystems B-Series Betriebsanweisung PDF herunterladen (Seite 22)

Chapter 3 : Operation

Elo LCD Touchmonitor User Guide - 20

Phase

The phase function is similar to the tracking control on a VCR. If your

VCR displays a jumpy or jittery picture, the tracking control allows you

to adjust the picture. The phase function allows you to optimize the

video timing and thus minimize jitter in the displayed video image.

Phase is factory set and seldom requires adjustment.

To adjust the phase:

1. Highlight the Phase menu option and press the SEL button. A

Phase gauge will display. The gauge will indicate a numeric

value which will change as you increase or decrease the con-

trast.

2. By using the UP and DN buttons adjust the phase.

3. When you have the phase at the desired level, press the SEL

button.

4. To exit the menu, highlight the Exit menu option and press the

SEL button.

Default Settings

The default settings function allows you to restore factory default set-

tings stored in the touchmonitor’s memory. These defaults cannot be

overwritten.

To restore the default settings:

1. Highlight the Default Settings menu option and press the SEL

button. All settings will be restored to their defaults.

2. Highlight the Exit menu option to return to the main window.

Image Position

The image position menu options allow you to center the active video

area.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 48 49

Keine Kommentare

Elo TouchSystems B-Series Betriebsanweisung Seite 22